White Balance
You should perform this procedure at the beginning of every shoot, and every time the lighting conditions change. IYou will need a camera with a manual white-balance function. There should be a "white balance" button or switch on your camera.
- If your camera has a filter wheel (or if you use add-on filters), make sure you are using the correct filter for the lighting conditions.
- Point your camera to a pure white subject, so that most of what you're seeing in the viewfinder is white. One of the best ways of doing this is using a plain white piece of paper.
- Set your exposure and focus.
- Activate the white balance by pressing the button or throwing the switch. The camera may take a few seconds to complete the operation, after which you should get a message (or icon) in the viewfinder.
Hopefully this will be telling you that the white balance has succeeded
If the viewfinder message is that the white balance has failed, then you need to find out why. A good camera will give you a clue such as "colour temperature too high" (in which case change filters).
When changing the white balance you an also alter the colour by holding up say a blue piece of paper and the white balance will change the colour to an orange colour to help balance out the colours this is good as you can then create a warm and cold hue and mood when filming or taking photos.
Comments
Post a Comment